TU Delft scientists integrate power electronics for MPPT in solar modules
Researchers from the Netherlands' Delft University of Technology have sought to embed power electronics in photovoltaic modules with the aim of increasing the shade tolerance of panels via maximum power point tracking (MPPT).
Their work consisted of conducting a feasibility study on whether copper planar air-core inductors can yield the required inductor properties to support sub-module power conversion in PV modules. They claim that implementing MPPT at the sub-module level can ensure that shading on a few cells or parts of the module has minimal impact on the overall performance.
“A common approach to enhance the inductance of an inductor involves using a ferromagnetic core made of material with large magnetic permeability. This study, however, investigates planar inductors without such a core,” the researchers explained. “Since the common PV-module materials all have a relative magnetic permeability close to one – similar to the magnetic permeability of vacuum and air – this design is referred to as air-core inductors.”
They investigated, in particular, how the planar air-core inductor design can be adjusted to achieve the desired inductor performance and evaluate the feasibility of integrating these inductors into a sub-module-level power converter.
The simulated configurations use copper as the inductor's conductor material, with an area fixed at 12.5 cm × 12.5 cm, which is the maximum available area for a 12.7 cm x 12.7 cm solar cell. The inner terminal of the inductor is connected to the metal back-side of a PV cell, while the outer terminal can be connected to an external circuit. The inductor is separated from the PV cell by an electrically insulating layer.
The inductors' performance was simulated using the finite element method simulator COMSOL with various coil design parameters. Namely, they were tested with a different internal diameter or middle gap, track spacing, track width, and thickness. With those size variations, the inductors' AC inductance and AC resistance were measured.
“It was shown that a minimum track spacing of a few millimeters is necessary to limit the proximity effect at frequencies of 50 kHz and above,” the group stated. “Additionally, it was observed that increasing the middle gap size or the number of turns can enhance the inductance, though both approaches come with the drawback of increased inductor resistance. The coil geometries that were simulated yield inductance values between 0.3
Customized/OEM/ODM Service
HomSolar Supports Lifepo4 battery pack customization/OEM/ODM service, welcome to contact us and tell us your needs.
HomSolar: Your One-stop LiFePO4 Battery Pack & ESS Solution Manufacturer
Our line of LiFePO4 (LFP) batteries offer a solution to demanding applications that require a lighter weight, longer life, and higher capacity battery. Features include advanced battery management systems (BMS), Bluetooth® communication and active intelligent monitoring.
Customised Lithium Iron Phosphate Battery Casing
ABS plastic housing, aluminium housing, stainless steel housing and iron housing are available, and can also be designed and customised according to your needs.
HomSolar Smart BMS
Intelligent Battery Management System for HomSolar Energy Storage System. Bluetooth, temperature sensor, LCD display, CAN interface, UART interface also available.
Terminals & Plugs Can Be Customized
A wide range of terminals and plugs can be customised to suit the application needs of your battery products.
Well-designed Solutions for Energy Storage Systems
We will design the perfect energy storage system solution according to your needs, so that you can easily solve the specific industry applications of battery products.
About Our Battery Cells
Our energy storage system products use brand new grade A LiFePO4 cells with a battery lifespan of more than 4,000 charge/discharge cycles.
Applications in Different Industries
We supply customized & OEM battery pack, assemble cells with wiring, fuse and plastic cover, all the cell wires connected to PCB plug or built BMS.
Applications: E-bike, Electric Scooter, Golf Carts, RV, Electric Wheelchair, Electric Tools, Robot Cleaner, Robot Sweeper, Solar Energy Storage System, Emergency Light, Solar Power Light, Medical Equipment, UPS Backup Power Supply.
We can provide you with customized services. We have the ability to provide a vertical supply chain, from single cells to pack/module and to a complete power solution with BMS, etc.
HomSolar (Shenzhen) Technology Co., Ltd
