Making green energy cheaper
Sunny Morocco seems like the ideal place to produce solar power.Sunny Morocco seems like the ideal place to produce solar power.
Just north of Marrakech lies the Green Energy Park, where researchers are working on making green energy technology more affordable, as part of Morocco’s drive to reduce energy dependency.
#Morocco has the 2nd largest wind power production in the MEA region
Morocco has the 1st & only Green Energy Park in Africa pic.twitter.com/H0oSFxZcr2
— Canopus (@nomadwithyou) 2 août 2017
Euronews’ Denis Loctier visited their concentrated solar power (CSP) plant, where he spoke to the coordinator of the EU-funded project, MinWaterCSP, Falk Mohasseb.
“The big advantage of CSP technology is that the source – the sun – is free. Another advantage is that it is relatively compact, and it is also quite an efficient system, compared to rival technologies like photovoltaic panels, for example,” he said.
But mirrors are difficult to keep clean in hot climates. The wind carries dust from nearby deserts, and washing it off uses up precious water resources. So scientists are looking for ways to reduce the use of water by measuring the reflectivity of the mirrors to determine the most water-efficient cleaning schedule.
According to Ahmed Alami Merroui, researcher in solar thermal systems at IRESEN (Institut de Recherche en Energie Solaire et Energies Nouvelles), “if we work on the optimisation of the cleaning cycles together with the development of materials for anti-soiling coatings, and other cleaning techniques, we will find the solutions.”
Large amounts of water are also used for cooling purposes, so researchers are looking into hybrid cooling systems that can use air instead of water when the temperature is low enough. Another problem is the accumulation of salt on the tubes, which affects the performance of the power plant.
“It’s a problem that depends on the quality of the water. In the end, it makes the condensers and therefore the power plant less efficient, by obstructing thermal exchange between the tube and the water used for cooling,” said El Ghali Bennouna, researcher in solar thermal systems at IRESEN.
To find out which chemicals worst affect the cooling systems, researchers in their lab add different salts to the cooling system and run it round the clock. The results will reveal which chemicals need to be removed to stop the salt from accumulating – a process known as salt fouling.
“We may not stop the fouling completely, but if we reduce it, the heat exchange will improve and that will of course give us optimal cooling,” said Afaf Zaza, a PhD student in heat exchangers at IRESEN.
It’s hoped the research will lead to significant water savings. Cooling systems could, for instance, use recycled water from other industrial processes. The ultimate goal being to make CSP plants more competitive, and help promote this environmentally-friendly technology in regions that are heavily dependent on affordable fossil fuels.
“It could really make a big difference,” said Falk Mohasseb. “Areas that were previously not so attractive because of water scarcity could now host CSP plants. And it is important for these countries to become less dependent on fossil fuels.”
According to the researchers, technological improvements could eventually save up to 25% of the water currently used for cleaning the mirrors, and up to 95% of what’s lost to evaporation in the cooling systems.
A euronews</a> team was <a href="https://twitter.com/IRESEN?ref_src=twsrc%5Etfw">IRESEN's Green Energy Park with <a href="https://twitter.com/MinWaterCSP?ref_src=twsrc%5Etfw">MinWaterCSP coordinator Kelvion_HX</a> & colleagues from <a href="https://twitter.com/IRESEN?ref_src=twsrc%5Etfw">IRESEN – emission in 10/2017 pic.twitter.com/WHUlo2qOmK
— MinWaterCSP (@MinWaterCSP) 21 septembre 2017
Customized/OEM/ODM Service
HomSolar Supports Lifepo4 battery pack customization/OEM/ODM service, welcome to contact us and tell us your needs.
HomSolar: Your One-stop LiFePO4 Battery Pack & ESS Solution Manufacturer
Our line of LiFePO4 (LFP) batteries offer a solution to demanding applications that require a lighter weight, longer life, and higher capacity battery. Features include advanced battery management systems (BMS), Bluetooth® communication and active intelligent monitoring.
Customised Lithium Iron Phosphate Battery Casing
ABS plastic housing, aluminium housing, stainless steel housing and iron housing are available, and can also be designed and customised according to your needs.
HomSolar Smart BMS
Intelligent Battery Management System for HomSolar Energy Storage System. Bluetooth, temperature sensor, LCD display, CAN interface, UART interface also available.
Terminals & Plugs Can Be Customized
A wide range of terminals and plugs can be customised to suit the application needs of your battery products.
Well-designed Solutions for Energy Storage Systems
We will design the perfect energy storage system solution according to your needs, so that you can easily solve the specific industry applications of battery products.
About Our Battery Cells
Our energy storage system products use brand new grade A LiFePO4 cells with a battery lifespan of more than 4,000 charge/discharge cycles.
Applications in Different Industries
We supply customized & OEM battery pack, assemble cells with wiring, fuse and plastic cover, all the cell wires connected to PCB plug or built BMS.
Applications: E-bike, Electric Scooter, Golf Carts, RV, Electric Wheelchair, Electric Tools, Robot Cleaner, Robot Sweeper, Solar Energy Storage System, Emergency Light, Solar Power Light, Medical Equipment, UPS Backup Power Supply.
We can provide you with customized services. We have the ability to provide a vertical supply chain, from single cells to pack/module and to a complete power solution with BMS, etc.
HomSolar (Shenzhen) Technology Co., Ltd
