Germany could deploy 10 million heat pumps by 2030
Researchers from the German Institute for Economic Research (DIW Berlin) have analyzed different scenarios for expanding decentralized heat pumps in Germany by 2030. They have focused on the role of buffer heat storage in mitigating electricity needs and on the effect of different electricity generation methods on costs, capacity investments, and emissions. They found that investing in PV can cost-effectively accompany the rollout of heat pumps.
“In our analysis, we use the open-source capacity expansion TEASER model that considers the hourly variability of renewable electricity generation and heat demand over an entire year,” the team explained. “It also accounts for additional electric load related to electric vehicles and the production of green hydrogen. To the best of our knowledge, such an analysis has not been done so far.”
In the first scenario tested, the reference scenario, the team assumed 1.7 million decentralized heat pumps in 2030, reflecting the stock of heat pumps installed in Germany in 2024. It also assumed 24.7 TWh of heat supply annually. The slow rollout scenario assumed the number of heat pumps would reach 3 million by 2030, exclusively installed in single- and two-family homes built between 1995 and 2009. In that case, the yearly heat supplied would reach 53.2 TWh.
In the government rollout scenario, the team assumed they would reach the official German targets of 6 million heat pumps in 2030, covering most single- and two-family homes built after 1995 and using 92.9 2 TWh per year. Lastly, they suggested a fast scenario where 10 million heat pumps are installed by 2030, supplying 226.3 TWh of heat. In this scenario, heat pumps would be installed in more single- and two-family homes, even old ones built before 1979 with very low energy efficiency standards.
“Across all building types, air-source heat pumps account for 80% of installed heat pumps and ground-source heat pumps account for the remaining 20%,” the team explained. ”The assumed energy storage size is expressed in energy-to-power (E/P) ratios ranging from 0 to 168 h (0, 2, 6, 24, and 168 h). In this terminology, a heat storage with an E/P ratio of 2 h has a total heat storage capacity that equals 2 h of the maximum heat output of the heat pump.”
Image: German Institute for Economic Research (DIW Berlin), Communications Earth & Environment, CC BY 4.0
For the energy mix in the simulation, the group capped coal—and oil-fired power plants at current levels. Gas-fired power plants, open cycle (OCGT), and combined cycle (CCGT) could be expanded beyond current levels. Based on government statistics, onshore wind plants were capped at 115 GW and offshore at 30 GW. The capacities of solar PV do not have any limits.
“We find that the expansion of the German heat pump stock from 1.7 to 10 million would require additional investments of around 54–57 GW of solar PV capacity in a least-cost solution, depending on how much heat storage is available,” the academics said. “For a slower rollout speed, which still achieves the German government’s target of 6 million heat pumps by 2030, additional PV capacities of around 4–8 GW are needed.”
Customized/OEM/ODM Service
HomSolar Supports Lifepo4 battery pack customization/OEM/ODM service, welcome to contact us and tell us your needs.
HomSolar: Your One-stop LiFePO4 Battery Pack & ESS Solution Manufacturer
Our line of LiFePO4 (LFP) batteries offer a solution to demanding applications that require a lighter weight, longer life, and higher capacity battery. Features include advanced battery management systems (BMS), Bluetooth® communication and active intelligent monitoring.
Customised Lithium Iron Phosphate Battery Casing
ABS plastic housing, aluminium housing, stainless steel housing and iron housing are available, and can also be designed and customised according to your needs.
HomSolar Smart BMS
Intelligent Battery Management System for HomSolar Energy Storage System. Bluetooth, temperature sensor, LCD display, CAN interface, UART interface also available.
Terminals & Plugs Can Be Customized
A wide range of terminals and plugs can be customised to suit the application needs of your battery products.
Well-designed Solutions for Energy Storage Systems
We will design the perfect energy storage system solution according to your needs, so that you can easily solve the specific industry applications of battery products.
About Our Battery Cells
Our energy storage system products use brand new grade A LiFePO4 cells with a battery lifespan of more than 4,000 charge/discharge cycles.
Applications in Different Industries
We supply customized & OEM battery pack, assemble cells with wiring, fuse and plastic cover, all the cell wires connected to PCB plug or built BMS.
Applications: E-bike, Electric Scooter, Golf Carts, RV, Electric Wheelchair, Electric Tools, Robot Cleaner, Robot Sweeper, Solar Energy Storage System, Emergency Light, Solar Power Light, Medical Equipment, UPS Backup Power Supply.
We can provide you with customized services. We have the ability to provide a vertical supply chain, from single cells to pack/module and to a complete power solution with BMS, etc.
HomSolar (Shenzhen) Technology Co., Ltd
