Canadian scientists build micro III-V solar cells with record-breaking open circuit voltage
A Canadian research team has recently developed a micrometer-scale III-V solar cell for applications in concentrated photovoltaics (CPV).
Gallium arsenide (GaAs) and other III-V materials – named after the groups in the periodic table they belong to – are among the best known in terms of efficiency potential for solar cells. Their high production costs, however, have so far limited them to niche applications powering satellites and drones. In these devices, low weight and high efficiency are more pressing concerns than the cost of energy produced.
“The major drawback of these materials is their cost, typically more than two orders of magnitude more expensive than technology deployed on a large scale,” the scientists said. “To manage this problem, concentrated photovoltaic (CPV) technology promises to reduce costs by adding concentration optics to solar cells, thereby limiting the uses of III–V materials.”
The proposed solar cell is based on indium gallium phosphide (InGaP), indium gallium arsenide (InGaAs) and germanium (Ge) and has an active area of 0.25 mm2.
“Our solar cell achieved the highest open-circuit voltage for InGaP/InGaAs/Ge of different size in the literature to our knowledge,” the research's lead author, Corentin Jouanneau, told pv magazine. “The device also achieved a power conversion efficiency of over 30%.”
In the paper “Fabrication and characterization of high performance sub-millimetric InGaP/InGaAs/Ge solar cells,” published in Solar Energy Materials and Solar Cells, Jouanneau and his team explained that they build the cell with a metal contact made of nickel (Ni) and gold (Au), as well as with an antireflective layer relying on silicon nitride (SiN) and silicon oxide (SiO).
The use of plasma process enabled wafer losses of less than 10% and the design of complex shapes, the team noted. They used a process based on plasma etching for cell isolation and singulation, which reportedly enables to manufacture solar cells of any size and shape. As a result, they were able to produce cells with a size ranging from 12.25 mm to 0.01 mm and different shapes: round, triangular, maple leaf, hexagonal.
The cells were then tested under standard illumination conditions, and a 0.25 mm2 cell was found to be the champion device with an efficiency of 30.61% and a record-breaking open-circuit voltage of 2.39 V. This result was attributed to “excellent” sidewall passivation.
The smallest device, measuring only 0.01 mm2, was found to reach an efficiency of 21.40%.
“These cells were not manufactured for their performance but to demonstrate the capabilities of plasma etching,” the academics explained, noting that their work was mainly intended to identify the cells that were most affected by perimeter recombinations.
Customized/OEM/ODM Service
HomSolar Supports Lifepo4 battery pack customization/OEM/ODM service, welcome to contact us and tell us your needs.
HomSolar: Your One-stop LiFePO4 Battery Pack & ESS Solution Manufacturer
Our line of LiFePO4 (LFP) batteries offer a solution to demanding applications that require a lighter weight, longer life, and higher capacity battery. Features include advanced battery management systems (BMS), Bluetooth® communication and active intelligent monitoring.
Customised Lithium Iron Phosphate Battery Casing
ABS plastic housing, aluminium housing, stainless steel housing and iron housing are available, and can also be designed and customised according to your needs.
HomSolar Smart BMS
Intelligent Battery Management System for HomSolar Energy Storage System. Bluetooth, temperature sensor, LCD display, CAN interface, UART interface also available.
Terminals & Plugs Can Be Customized
A wide range of terminals and plugs can be customised to suit the application needs of your battery products.
Well-designed Solutions for Energy Storage Systems
We will design the perfect energy storage system solution according to your needs, so that you can easily solve the specific industry applications of battery products.
About Our Battery Cells
Our energy storage system products use brand new grade A LiFePO4 cells with a battery lifespan of more than 4,000 charge/discharge cycles.
Applications in Different Industries
We supply customized & OEM battery pack, assemble cells with wiring, fuse and plastic cover, all the cell wires connected to PCB plug or built BMS.
Applications: E-bike, Electric Scooter, Golf Carts, RV, Electric Wheelchair, Electric Tools, Robot Cleaner, Robot Sweeper, Solar Energy Storage System, Emergency Light, Solar Power Light, Medical Equipment, UPS Backup Power Supply.
We can provide you with customized services. We have the ability to provide a vertical supply chain, from single cells to pack/module and to a complete power solution with BMS, etc.